종류 : 풀 레인지 항공용 수신기 모드 : S-FHSS or FHSS 특징 : 고전압 지원, 주파수 호핑 스프레드 확산 방식, 듀얼 안테나, SBus 호환 전압 : 4.8V-7.4V 호환 배터리 : NiCd, NiMH, LiPo, LiIon or LiFe 크기 : 24.9 x 42.8 x 14.0 mm 무게 : 9.5 g
제품 구성품 4 : [HOBBYWING] Platinum 50A V3 브러시리스 변속기 6셀 지원
Hobbywing Platinum-50A-V3 PRO Brushless ESC
변속기 제조사의 명가 하비윙 사의 최상급 라인업 "플래티늄" 시리즈의 최신라인업 V3 모델입니다.
50A-V3 모델은 HV서보를 지원하는 대용량 5.2V/6.0V/7.4V Voltage Select Switching BEC(con. 7A / burst 15A)가 내장되었으며, 외부 거버너에 대응하도록 RPM Out 라인이 추가되었습니다.
세밀한 스로틀변화를 그대로 느낄 수 있을 정도의 고해상도를 지원하며
고효율의 제품으로 멀티콥터/헬리콥터에 모두 최상급인 명품입니다.
제품 제원
● 입력전압 : 2~6S Lipo, 5.25V~25.2V
● 출력전류 : 50A(연속) / 75A(최대 10초)
● BEC 출력 : 스위칭 타입 BEC(5.2V/6V/7.4V : 연속 7A / 최대 15A)
● 입력/출력 전선 : 입력 14AWG / 출력 14AWG
● 무게 : 49g
● 크기 : 48x30x15.5mm
Features
High-performance microprocessor with the operating frequency up to 50MHz brings excellent compatibility (with most motors in the market) and high driving efficiency.
The maximum motor speed can reach 210000 RPM (for 2-poles), 70000 RPM (for 6-poles) and 35000 RPM (for 12-poles).
Multiple flight modes: Fixed Wing Airplane/ Heli with Governor Off/ Heli with Governor (Elf) / Heli with Governor Store.
Adjustable throttle range, compatible with various transmitters. It brings smooth, soft & linear speed adjustment and rapid throttle response.
Microprocessor powered by independent DC regulator has better anti-interference performance, which greatly reduces the risk of losing control.
Built-in high-efficient & high-power (switch mode) BEC can make the output voltage switched among 5.2V / 6.0V / 7.4V / 8.4V. (*For the specific output voltage, please refer to the parameter list below.)
Brand new governor program, easy to operate; and its excellent speed-governing effect can make big rotor blades more stable even under rapid load change.
”Restart in auto rotation" can manually interrupt the auto rotation and quickly restart the motor to avoid crashes caused by incorrect operations.
Independent output port for RPM (that is: motor speed) signals.
Compatible LCD program box (*optional accessory), its simple and visual interface allows users to set/revise all the ESC parameters easily. (For detailed information, please refer to User Manual of LCD Program Box.)
Upgradeable firmware, you can upgrade the ESC after connected it to a PC via the USB cable on the program box.
The independent port, for connecting the program box and setting parameters, can also be the output port of the running status data of the ESC. When coordinating with the data transmission module, it can make the real-time data monitoring and logging possible.
Multiple protection features including input voltage abnormality protection/ low-voltage cutoff protection/ throttle signal loss protection effectively prolong the service life of the ESC.
[ 상세 사양 ] - LCD 디스플레이 모니터 - 입력 전압 : DC 12V - 출력 파워 : 최대 80W - 충전 전류 : 0.1~5.0A - 밸런싱 전류(리튬) : 300mAh/Cell - 니카드(NiCd)/니켈수소(NiMh) 배터리 지원 셀 수 : 1~15셀 - 리튬(Li-Po/Li-ion/Li-Fe/Li-HV) 지원 셀 수 : 1~6셀 - 납축 배터리 지원 전압 : 2V ~ 50V
- 충전 완료시 알람음 알림 - 무게 : 450g - 크기 : 137 x 87 x 33mm
[ 프로그램 ]
- 리튬 배터리 일반 충전
- 리튬 배터리 밸런싱 충전
- 리튬 배터리 빠른 밸런싱(FAST MODE) 충전 : 99% 까지 빠른속도로 충전하는 모드
- 리튬 배터리 장기보관 충전 : 각 셀당 전압을 3.8v 로 통일시켜 1개월 이상 장기보관을 위한 모드
- 리튬 배터리 방전
- 니켈수소, 니카드 배터리 일반/급속 충전
- 니켈수소, 니카드 배터리 방전
- 니켈수소, 니카드 배터리 리싸이클
- 납축 배터리 충전/방전
- 데이터 저장
[ 충전 오류 알림 ]
- REVERSE POLARITY : 역전류 경고
- CONNECTION BREAK : 배터리 연결 안됨
- SHORT ERR : 쇼트 에러
- INPUT VOL ERR : 입력 전압 저하
- VOL SELECT ERR : 배터리 전압 설정 오류
- BREAK DOWN : 충전 오류
- BATTERY CHECK LOW VOLTAGE : 리튬 배터리 저전압 경고
- BATTERY CHECK HIGH VOLTAGE : 배터리 고전압 경고
- BATTERY VOLTAGE CELL LOW VOL : 특정 셀 저전압 경고
- BATTERY VOLTAGE CELL HIGH VOL : 특정 셀 고전압 경고
- TEMP OVER ERR : 충전기 과열 경고, 충전기를 식혀주십시오!
[ 제품 구성 ]
- B6 디지털 충전기
- 딘스 충전 케이블
- JST 충전 케이블
- 부스터 충전 케이블
- 수신기 배터리(후타바) 충전 케이블
- 입력용 악어잭
- 12V 5A (60W) 파워 서플라이
충전기 전면부에 대형 LCD 액정 디스플레이와 4개의 스위치가 있습니다.
LCD 액정 디스플레이를 통해 충전상황을 확인할 수 있으며,
특히 리튬 배터리 충전시 각 셀당 전압의 밸런스 상황을 직접 눈으로 실시간 확인할 수 있습니다.
전면부의 Batt Type(Stop), Dec(◀), Inc(▶), Start(Enter) 스위치를 이용하여 배터리 종류와 전압, 전류등을 설정할 수 있습니다.