Construction: Balsa and plywood Wing: Two piece with aluminum joiner Aileron Control: Dual servo Covering: Hangar 9 UltraCote Cowl: Painted fiberglass Landing Gear: Main-pre-bent painted aluminum, nose gear wire, 2.5 (63mm) diameter wheels Engine Mount: Plywood Motor Mount: Two-piece composite plastic Spinner: Plastic 2.28 (58mm) diameter Fuel Tank: Approximately 10oz (300cc)
INCLUDES
Cessna 182 ARF with Engine and Motor Mounts, Fuel Tank, Spinner, Decals, Landing Gear with Wheels, Painted Pilot Figure
REQUIREMENTS
Radio: 6-channel minimum Servos: 7 standard (2-aileron, 2-flap, 1-elevator, 1-rudder, 1-throttle (if using glow engine) Receiver Battery: 4.8-6V 800-1200mAh NiMH
For Glow Power Engine: .46-.55 2-stroke or .52 4-stroke engine Glow fuel and starter
For Electric Power Motor: Brushless outrunner Rimfire .46-.55 ESC: 50 - 80A Battery: 6S LiPo 4000-5500mAh Battery Charger: Compatible with selected battery Propeller depending on engine or motor selected
SPECIFICATIONS
Wingspan: 65.6 (1667mm) Length: 51 (1295mm) Flying Weight: 116 - 120 oz (3300-3400 g) Wing Area: 540 sq in (34.2 sq dm) Wing Loading: 27.85 ozsq dm (85 gsq dm) Center of Gravity: 65-70mm (2.6-2.8) Back from the leading edge of the wing at the fuselage Airfoil: NACA Control Throws Low Rate High Rate Ailerons updown: 8mm 10 expo 10mm 10 expo Elevator updown: 8mm 12 10mm 12 Rudder leftright: 20mm 15 30mm 15 Flaps: Mid 15mm down Landing 20mm down
Ideal for intermediate-level pilots, the 65.6¡± span, Cessna 182 GP/EP ARF is equally enjoyable with glow or electric power. Features include balsa/ply construction, a bolt-on two-piece wing, Oracover film covering, a painted 'glass cowl and wheel pants, plastic spinner and a complete hardware package.
- Strong, lightweight balsa/plywood construction.
- Factory-covered in genuine Oracover? film.
- Functioning scale flaps.
- Aluminum main landing gear and spring wire nose gear.
- 2.3¡± (58 mm) plastic spinner.
- High-quality hardware package with fuel tank and engine mount is included.