MicroBeast V5 의 중국산 카피 버전 자이로 입니다.
정품 마이크로비스트에 비해 절반의 가격으로 모든 기능을 동일하게 사용할 수 있으며,
특히 정품 마이크로비스트의 자동수평(레스큐 Resque) 기능을 사용하기 위해서는 추가 업데이트 비용이 필요한 반면,
본 제품은 업데이트가 완료되어 있어서 추가비용 없이 레스큐 기능을 사용할 수 있습니다.
셋팅 방법은 정품 마이크로비스트와 동일하며, 셋팅에 대한 별도의 기술 지원을 하지 않습니다.
주의 : 자동수평(레스큐) 기능은 비행 중 완벽한 수평을 보장하지 않습니다!
※ 셋팅 전에 서보를 미리 연결해놔서 서보 고장나는 경우가 종종 있습니다. 반드시 서보 셋팅 후 서보를 연결하세요.
TGZ580 PLUS is a gyro system which is used to stabilize and control your flybarless RC Helikopter on all three flight axis. It can be used with many different types of helicopters like 3D aerobatic helis, F3C competition helicopters as well as scale helicopters with 2 or more rotorblades. The system comes with basic flybarless stabilization functionality This is the "ProEdition" version, This enables additional features like AttitudeControl for recue bailout or constant leveling and a feature called Bank Switching which allows to change between different parameter presets in flight to serve different flight conditions or flying styles.
To setup TGZ580 PLUS there is no need for any additional devices. All you need is your radio system and your helicopter. Thanks to the well proven EasySetup system you can do all the necessary adjustment directly at the device and in very short time. If you like to get more insight into the system and like to have a more visualized type of setup you can also use the StudioX App for PC/Mac or StudioXm for your smartphone/tablet in combination with the USB2SYS interface (PC/Mac) or BLE2SYS interface (smartphone/tablet) (optional available). These apps are the source to get even more out of your device like saving/restoring paramaters, loading preset heli configurations and making advanced adjustment to fully customize the device to your needs.
**** Attitude Control & Bank Switching
*** Attitude Control
The Attitude Control feature overs different modes for self leveling and stabilizing the helicopter automatically. You can choose between "Bailout rescue mode", "3D-Mode" and "Angular mode" which will make your heli fly like a quad. Basically when you activate the AttitudeControl in flight it will turn your helicopter back to level position when you release the sticks.
There are even more options like pitch input control and locking mechanisms to prevent the pilot from adding wrong stick input. AttitudeControl will turn TGZ580 PLUS into a perfect training partner and helping hand to train flying, learn new maneuvers or simply give a good feel of having a backup!
*** Bank Switching
With Bank Switching you can change between 3 different parameter sets in flight, instead of using only one fixed parameter set. This allows to adapt the system to different flight conditions or different rotorhead speeds, i.e. when hovering, cruising, speed flying, landing and so on. Or you can use the Bank Switching to selectively change specific parameters, i.e. switch between different rescue modes or test the effects of a parameter. Please note that due to the variety of setup options it is only possible to enable and setup the bank switching with the StudioX computer software or StudioXm App for mobile devices.
Features:
Servo pulse rates:
*. supports nearly all types of swashplate and rudder servos
*. Swashplate: 50 - 333Hz
*. Rudder: 50 - 560Hz
Preset swashplate mixing:
*. mCCPM
*. eCCPM: 90 (3/4 servos), 120, 135/140
Or freely adjustable with StudioX software
Input signals:
*. Single channels
*. PPM serial pulse
*. BEASTX SRXL
*. Spektrum SRXL/SRXL2
*. JR XBus
*. Graupner HOTT SUMD
*. Multiplex SRXL V1+V2
*. Jeti UDI/ExBus
*. Futaba S.Bus/S.Bus2
*. Spektrum remote receiver (DSM2/DSMX)
*. JR RJ01 remote receiver (DMSS)
*. ALIGN/FlySky iBus
Specifications:
Input voltage : 3.5V - 7.4V DC
Processor : 32 Bit ARM
Sensor : 6-Axis MEMS (Gyro + Accelerometer)
Dimensions : 36 x 25 x 14 mm
Weight (w/o wiring): ca. 11g
![[알씨뱅크] TGZ580 V5 TGZ580 V5 플라이바리스 헬기용 6축 자이로 (USB 인터페이스 포함) - 자동수평기능 지원](/shop/data/goods/fm73985_1792397447.jpg)