¡Ø¹®Àǽà »óǰ¹øÈ£¸¦ ¾Ë·ÁÁÖ¼¼¿ä
»óǰ»ó¼¼¼³¸í
¡¼Features¡½
- Mini size and 4.8g weight, PPM and multi-protocol digital serial receivers supported.
- 32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware solution provide more reliable performance.
- 6 flight modes, including GYRO-OFF, NORMAL, LOCK, ANGLE, LEVEL and HOVER modes.
- Flying-wing (for Delta-wing), V-Tail, Remote Master Gain.
- Firmware upgradable and Programming Card supported.
Main Controller: 32-bit MCU
Sensor: High-precision MEMS 6-axis sensor
Operating Voltage: DC 3.6V - 8.4V
Operating Current: 20mA@5V
Size: 30¡¿19.5¡¿7.5mm (L¡¿W¡¿H)
Weight: 4.8g (excluding wires)
1x HobbyEagle A3 Mini Flight Controller
1x USB Adapter
2x Data Cables
Serial Receiver Protocols Supported:
PPM Receiver
For Futaba S.Bus (compatible with FrSky SBUS, RadioLink SBUS and WFLY WBUS)
Spektrum DSM/DSMX 1024 Satellite Receiver
Spektrum DSM/DSMX 2048 Satellite Receiver
Spektrum SRXL
Multiplex SRXL / JR XBUS Mode B
Graupner SUMD
FlySky iBus
Receiver Connection:
A3 Mini supports PPM and multi-protocol digital serial receivers which allows you to connect the receiver to the gyro with one single wire on the slot [Serial RX]. Depending upon the receiver type selected, A3 Mini uses the preset channel assignment to recognize the channels from the receiver. Check if your radio transmits the channels in the correct order. After each time you have changed the receiver type the current channel settings will be reset to the default. Choose "None" for those channels you do not use.
Servo Connection:
A3 Mini supports Standard Fixed-wing, Flying-wing (for Delta-wing) and V-Tail.
![[¾Ë¾¾¹ðÅ©] A3-MINI [Hobby Eagle] A3 ¹Ì´Ï 6Ãà ÀÚÀÌ·Î - ºñÇà±â¿ë ÀÚµ¿ ¼öÆòºñÇà(È£¹ö¸µ) ÀåÄ¡ 1](/shop/goods/proxy/811470.jpg)
![[¾Ë¾¾¹ðÅ©] A3-MINI [Hobby Eagle] A3 ¹Ì´Ï 6Ãà ÀÚÀÌ·Î - ºñÇà±â¿ë ÀÚµ¿ ¼öÆòºñÇà(È£¹ö¸µ) ÀåÄ¡ 2](/shop/goods/proxy/811471.jpg)

