* 주문건 중 일부 예약 상품이 포함되어 있을 경우, 모든 상품이 준비된 후 일괄 배송됩니다.
예약 상품만 따로 배송을 원하시는 경우 주문을 따로 해주시기 바랍니다.
* 네이버페이 주문시 예약발송 처리되며 상품 수령 후 구매확정 하시면 됩니다.
* 상품별로 입고 시기가 다르므로 배송 일정에 대해서는 고객센터로 문의주시기 바랍니다.
키트/PNP 제품 구입시 주의사항
● 제품 상세 설명을 반드시 참고하셔서 제품 구성품에 주의하십시오.
● KIT, ARF, PNP, COMBO 제품은 조종기가 포함되어 있지 않습니다.
● 모든 PNP 제품은 발송 전 개봉하여 각 전자장치 (서보, 모터, 변속기, 리트렉트, LED) 작동 테스트 후 발송됩니다.
● 아래 내용은 KIT, ARF, PNP 의 일반적인 제품 구성이며, 정확한 구성품은 각 제품의 상세 설명을 참고하십시오.
- KIT (키트) / ARF : 기체의 프레임(껍데기)와 하드웨어(링키지 등)만 있으며, 전자 기자재는 일체 미포함
- PNP : 기체의 프레임 및 전자 기자재(모터, 변속기, 서보 등)가 함께 포함(또는 조립완료) 되어 있음. 송수신기 및 배터리 관련은 미포함.
- BNF : 기체의 프레임 및 전자 기자재(모터, 변속기, 서보, 수신기)가 조립 완료되어 있음. 조종기는 미포함이며, 특정 조종기만 사용 가능.
TAROT S550 HexaCopter ARF Super Combo!
Mini S800으로 해외에서 호평 받고 있는 타롯사의 S550 Super Combo Edition!
메인 프레임 외에, 모터, 변속기, 프로펠러, 픽스호크 FC 등 비행에 필요한 기자재가 모두 포함된 ARF Super Combo 패키지 입니다!
아울러 Gimbal 및 배터리 BED를 장착, 다양한 Mission에 적용 가능한 All Round 드론 시스템.
모터가 6개 장착된 헥사콥터 타입의 드론으로, 픽스호크를 이용한 연구/개발/수업/강의 등 전천후로 사용이 가능한 제품입니다.
모터가 4개인 F450, S500 보다 더욱 뛰어난 안정성을 가지고 있습니다.
An excellent strong lightweight Hexcopter frame with carbon fiber landing gear and a bonus built in printed circuit board (PCB) for neat and easy wiring.
The added lift capacity of a hex configuration makes this frame ideal for carrying larger payloads such as camera systems and other electronic components.
This makes for an exceptional camera rig or simply a very agile and powerful multi-rotor frame for aerobatics!
The arms have carbon fibre rods through the center and are upswept which improves stability and provides faster forward flight.
The upper deck flight controller distribution board also includes a mini USB socket which allows for PC connectivity, so there will be no need to disassemble the frame to calibrate your flight controller.
Assembly of this frame is super simple with pre-threaded sleeves for all the frame bolts so no lock nuts are required. The motor mounts are ready to take a selection of motors with mounting hole centers of 16, 19 and 25mm once again making this a very universal frame at a very affordable price.
Power Distribution 보드가 기본 장착 되어 있어 복잡한 배선도 손쉽게 솔더링이 가능합니다.
아울러 Gimbal 및 배터리 BED를 장착, 고프로급의 짐벌과의 조합으로 항공촬영용 기체로 사용하실 수 있습니다.
An excellent strong lightweight Hexcopter frame with carbon fiber landing gear and a bonus built in printed circuit board (PCB) for neat and easy wiring.
The added lift capacity of a hex configuration makes this frame ideal for carrying larger payloads such as camera systems and other electronic components.
This makes for an exceptional camera rig or simply a very agile and powerful multi-rotor frame for aerobatics!
The arms have carbon fibre rods through the center and are upswept which improves stability and provides faster forward flight.
The upper deck flight controller distribution board also includes a mini USB socket which allows for PC connectivity, so there will be no need to disassemble the frame to calibrate your flight controller.
Assembly of this frame is super simple with pre-threaded sleeves for all the frame bolts so no lock nuts are required. The motor mounts are ready to take a selection of motors with mounting hole centers of 16, 19 and 25mm once again making this a very universal frame at a very affordable price.
• Pre-threaded brass sleeves for all frame bolts • Locating tabs for arms • PCB for easy and neat wiring • Easy assembly
• Frame Diameter: 550mm • Height: 288mm • Weight: 445g (frame only) • Motor Mount Bolt Holes: 16~19~25mm
• 6 x 28mm 1000~1200kv (or similar size/kv) • 6 x 18~30 Amp ESC • 6 x 8~10 Prop (3CW & 3CCW) • Flight Controller(Tarot ZYX-M) • 2200~5000mAh 3~4s Lipoly Battery
<조립 참고 영상>
<제품 이미지>
제품 구성품 2 : [KoA] 코아 FC 신형 H743 국산 범용 픽스호크 드론 비행 컨트롤러 (KC 인증) + M10 GPS 셋트 (예약판매)
국산 비행컨트롤러인 KoA FC 와 GPS 의 셋트 상품입니다.
GPS 마운트와 각종 악세사리가 포함되어 있습니다.
MADE IN KOREA
대한민국에서 설계/생산하는 제품입니다
KC 인증번호 : R-R-fcS-KOADRONE-FC
국산 비행 컨트롤러의 새로운 대안
드론의 핵심 부품인 비행 컨트롤러는 국산 제품을 구매하기 어렵습니다. 많은 국내 드론 업체들이 자체 개발한 컨트롤러를 사용하지만, 대부분 자사 드론에 최적화되어 있어 범용성이 부족하고 별도로 판매되지도 않습니다. 물론 일부 고가 제품이 있지만, 높은 가격 때문에 접근성이 낮습니다.
이러한 상황 때문에 10년이 넘은 구형 프로세서를 사용하는 중국산 비행 컨트롤러가 여전히 대학 교육이나 기업 연구용으로 널리 쓰이고 있습니다.
KOA DRONE FC는 이러한 아쉬운 점을 해결하기 위해 탄생했습니다. 고가의 최고급 컨트롤러를 대체하기보다는, 합리적인 가격으로 구형 중국산 픽스호크를 대체하는 것이 우리의 목표입니다. 누구나 부담 없이 사용할 수 있는 국산 비행 컨트롤러를 제공하여 드론 산업 발전에 기여하고자 합니다.
합리적인 가격, 뛰어난 범용성, 그리고 편리한 확장성
KOA DRONE FC는 저렴한 가격과 뛰어난 범용성을 핵심 목표로 설계되었습니다.
특히, 사용자가 원하는 드론 소프트웨어를 자유롭게 선택할 수 있도록 ArduPilot, PX4, Betaflight, iNAV를 모두 지원합니다. 이를 통해 연구, 교육, 취미 등 다양한 분야에서 활용될 수 있는 최적의 솔루션을 제공합니다.
더 나아가, 레이싱 드론용으로 널리 사용되는 30.5mm 규격의 장착 구멍까지 적용하여 사용 편의성과 확장성을 높였습니다. 이로써 드론 종류에 구애받지 않고 누구나 손쉽게 사용할 수 있습니다.
Using the latest EFM8BB21F16G high speed control chip. By default, the hardware for PWM is turned on and the Damped Light hardware for PWM drives the motor. The noise is low and the throttle response is smoother.
A 6-layer, 3-ounce copper-thick and high-quality for PCB is adopted, and the layered layout of large current and small control signal is adopted to Enhance the anti-interference ability. The gold plating process on for PCB surface can effectively improve the current resistance and heat dissipation ability of ESC.
The ESC supports BLHeli-S and DShot 150/300/600 digital throttle. It has strong anti-interference ability and fast response capability.
Integrated for RGB multi-color bright LED night light, night flight is even more dazzling.
Damped Light mode, regenerative braking function, make motor deceleration more sensitive and effective, control more precise; Active continuous current technology, so that the battery recovery power, prolong the duration.
<제품 이미지>
< 픽스호크(아두파일럿)에 사용시 변속기 설정 방법 >
* 참고 : 이 설정 하지 않고 그냥 일반 변속기처럼 MAIN OUT 단자에 연결해서 쓰셔도 무방합니다.