[HITEC] MD65MG-CAN 산업용 서보
제품코드 : MD65MG-CAN
상품번호 : QQ73380
현재 상품 카테고리
![[알씨뱅크] MD65MG-CAN [HITEC] MD65MG-CAN 산업용 서보](/shop/data/goods/1648458071657.png)
판매가격 : 132,000원
상품번호 : QQ73380
※문의시 상품번호를 알려주세요
※문의시 상품번호를 알려주세요
상품상세설명
CAN 통신 시리즈
MD65MG - CAN
< 12mm Standard Metal Gear >
MD시리즈 기반, CAN 통신 전용 모델 입니다.
기존 PWM 신호로는 동작하지 않으며, 하이텍 홈페이지에서 전용 프로토콜을 받아 사용 하셔야 합니다.,
자세한 사항은 매뉴얼을 확인 부탁드립니다.
![[알씨뱅크] MD65MG-CAN [HITEC] MD65MG-CAN 산업용 서보 1](/shop/data/editor/16484580715970.png)
![[알씨뱅크] MD65MG-CAN [HITEC] MD65MG-CAN 산업용 서보 2](/shop/data/editor/16484580716211.png)
- 제 원
- Servo Actuator Grade: : Industrial
- Dimensions : 23.6 x 11.6 x 25.8 (mm)
- Weight : 12 (g)
- Operating Voltage : 4.8V ~ 6.0V
- Speed (Second @ 60°) : 0.11 ~ 0.14
- Maximum Torque : 1.8 ~ 2.2 kg/cm
- Motor Type : 3 Pole Cored Carbon Brush
- Position Sensor : Magnetic Encoder
- Gear Material : Metal
- Case : Plastic
Product Description
Features
- High Resolution 32-bit Programmable Digital Circuit
- CAN Bus (2.0A or 2.0B), UAVCAN, RS-485, PWM & TTL Protocol Capability
- Magnetic Encoder Position Sensor
- Wide Operating Voltage (4.8 ~ 6.0V)
- Heavy-Duty, Long Life Motors
- IP65 Rated Cases
- Customization and Modification Options Available
- Custom Connector Options Available
Parts and Accessories
- Replacement Gear Set
- Replacement Case Set
- Applicable Horns and Mounting Hardware
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
MD65MG Actuator Specifications
| Performance Specifications | |
| Control Signal | CAN (2.0A or 2.0B) / UAVCAN / RS-485 / PWM / TTL |
| Operating Voltage Range (volts DC) | 4.8 ~ 7.4V |
| No Load Speed (second @ 60°) | 0.21 ~ 0.14 |
| No Load Speed (RPM) | 47 ~ 71 |
| No Load Speed (deg. per sec.) | 285° ~ 428° |
| Maximum Torque Range (oz. / in.) | 54 ~ 84 |
| Maximum Torque Range (kg. / cm.) | 3.9 ~ 6.0 |
| Maximum Torque Range (Ncm.) | XX ~ XX |
| Current Draw at Idle (mA) | 30 |
| No Load Operating Current Draw (mA) | 180 |
| Stall Current Draw (mA) | 2,500 |
| Physical Specifications | |
| Dimensions (inches) | 1.18 x 0.39 x 1.45 |
| Dimensions (millimeters) | 30.0 x 10.0 x 37.0 |
| Weight (ounces) | 0.98 |
| Weight (grams) | 27.7 |
| Motor Type | Carbon Brush |
| Operational Life Cycle | N / A |
| Position Sensor | Magnetic Encoder |
| Position Sensor Rated Lifecycle | 1 Million Cycles |
| Gear Material | MP 1st Gear & 4 Metal Gears |
| Bearing Type | Dual Ball Bearing |
| Output Shaft (type / Ømm) | 25 |
| Case Material | Plastic |
| Dust / Water Resistance | IP65 |
기본정보
상품후기
상품문의
판매가격
132,000원
회원할인가격
132,000원
적립금
1,320원
제품코드
MD65MG-CAN
상품번호
QQ73380
제조사
HITEC
관련상품
