마텍 PM20S-2 파워 모듈

Matek POWER MODULE PM20S-2

- 2가지 출력이 동시에 나오는 듀얼BEC입니다. 

- 대형 방열판이 장착되어 있습니다.

- 입력전압은 20셀까지 가능합니다.(85V) 

- 막강한 출력을 보여주는 BEC입니다.

- 대형 기체에 강력 추천드립니다.

1번 BEC  5.3V / 6.1V / 8.1V 출력 선택. 연속 15A , 최대 22A 

2번 BEC  5.3V / 8.1V / 12.2V 출력 선택. 연속 15A, 최대 22A

구성

하단 사진 참조

PM20S-2 is made with 100V DC components.

Support 9V to 85V DC operating Input voltage with 85V TVS protection

2x independent Step-Down Voltage Regulators

Regulator 1 ,  5.3V / 6.1V / 8.1V output options.  supports typical continuous output current of up to 15A, Peak current of up to 22A.

Regulator 2 ,  5.3V / 8.1V / 12.2V output options.  supports typical continuous output current of up to 15A, Peak current of up to 22A.

1K:25K voltage divider built-in for 3.3V based voltage ADC

Size & Weight: 61x40x15mm, 63g

Regulator 1

Output voltage 5.3V / 6.1V / 8.1V options.

Output voltage tolerance 1.5%

Synchronous switching step-down (or buck) regulator with typical efficiencies of 90% to 96%

Supports typical continuous output current of up to 15A,  Peak current of up to 22A.

Output ripple  25mV (VIN=42V,  Output 5.3V @ 5A),  35mV (VIN=58V,  Output 5.3V @ 15A)

Standby current: 10~30mA

Reverse Input voltage protection: No

Thermal Shutdown 150C

Output Short-circuit tolerant (1 seconds)

Overcurrent protection & self-recovery

Tip: Input voltage >= 15V is required for continuous output current of 15A

Regulator 2

Output voltage 5.3V / 8.1V/12.2V options.

Output voltage tolerance 1.5%

Synchronous switching step-down (or buck) regulator with typical efficiencies of 90% to 96%

Supports typical continuous output current of up to 15A,  Peak current of up to 22A.

Output ripple  58mV (VIN=58V,  Output 12V @ 5A)

Standby current: 10~30mA

Reverse Input voltage protection: No

Thermal Shutdown 150C

Output Short-circuit tolerant (1 seconds)

Overcurrent protection & self-recovery

Tip: Input voltage >= 15V is required for continuous output current of 15A

마텍 홈페이지에 가시면 세팅에 관한 많은 자료를 찾아보실 수 있습니다.

https://www.mateksys.com/